Products
HOSCO Center Strip Modified Sanding Blocks
2025/08/28
Looking inside the soundhole of an acoustic guitar, the decorative work on the center strip may intrigue you with its preciseness even to detail.
Has anybody ever been caught up in a stereotype of tediousness of the center strip shaping? These are ones, effort-free!
Or those who already work on it by themselves in a conventional way, this may spare you some extra time to focus on other tasks.
Features
Versatility
Two different shapes per block x 2 options cover 4 decorative patterns for center strips, reinforcement material furnished inside on the back of acoustic guitars.
*The shape at the top and bottom of the photo shows how decorative processing of the center strip turns out.
Achievement Ensured
The protrusion of the blocks at the corners secures on-rail strokes as guides, allowing anybody to perform efficient decorative processing.
Attentiveness
For the best possible results, HOSCO cassette roll abrasives, (KCR120(Grit #120)-KCR240(Grit #240) in width of 64mm, are recommended to use.
*Product information is referred to the following “Related Post”.
Note
While it is designed to accommodate center strips of standard sizes, as a guideline, we do not recommend your use of it under the following conditions: Width: 20mm or wider Thickness: 1.5mm or less at the edges.
Line-up
Arch & Triangle
107 x 30 x 28mm
2 x Trapezium
107 x 30 x 28mm
